These Clemco TXD-Nozzles have contractor thread with a 1 -1/4” entry and metal jacket. They are long-venturi nozzles that are capable of high-production blasting at a distance of 18-24 inches for hard-to-clean surfaces, and 30-36 inches for loose paint and soft surfaces. They have an expected life of approximately 300 hours.
These nozzles are lined with durable tungsten carbide and are for hoses with a 1” ID. A hose with a 1” ID requires a 1" entry or 1-1/4" entry nozzle paired with a nozzle holder to accommodate the 1-7/8” OD of the hose. Your purchase of this nozzle includes an NW-32 Washer.
These Clemco TXD Nozzles are for use with 1" inside diameter x 1-7/8" outside diameter hoses.
These nozzles can be purchased in the following Clemco models:
Clemco TXD-6 Nozzle with a 3/8” nozzle orifice
Clemco TXD-7 Nozzle with a 7/16” nozzle orifice
Clemco TXD-8 Nozzle with a 1/2” nozzle orifice
NOTE: When your nozzle orifice goes up one size, or wears 1/16” past its original size, it’s time for a replacement.