SDX Flanged w/Qk Cplg Nozzle for Hoses 1" ID x 1-1/2" OD
(No reviews yet) Write a Review

0.00 LBS
Adding to cart… The item has been added

These Clemco SDX-Nozzles have a flanged mount to accommodate the included FHP Quick Coupling which couples to most hose couplings. SDX Nozzles are 1-1/4” entry and have a metal jacket. They are long-venturi nozzles that are capable of high-production blasting at a distance of 18-24 inches for hard-to-clean surfaces, and 30-36 inches for loose paint and soft surfaces. They have an expected life of approximately 300 hours.

These nozzles are lined with durable tungsten carbide and are for hoses with a 1” ID. A hose with a 1” ID requires a 1" entry or 1-1/4" entry nozzle. Your purchase of this nozzle includes an FHP Quick Coupling nozzle holder. The coupling gasket serves as the nozzle gasket. 

 These Clemco SDX Nozzles are for use with 1" inside diameter x 1-1/2" outside diameter hoses.

These nozzles can be purchased in the following Clemco models:

  • Clemco SDX-6 Nozzle with a 3/8” nozzle orifice
  • Clemco SDX-7 Nozzle with a 7/16” nozzle orifice
  • Clemco SDX-8 Nozzle with a 1/2” nozzle orifice
  • Clemco SDX-10 Nozzle with a 5/8” nozzle orifice
  • Clemco SDX-12 Nozzle with a 3/4” nozzle orifice

NOTE: When your nozzle orifice goes up one size, or wears 1/16” past its original size, it’s time for a replacement.


Air Consumption Chart
Product Info
Nozzle Sizes Chart
Nozzle Wear Chart