Clemco Classic Blast Machine Model 1648 Low Pressure Breathing Air System (LP) Complete Package, Portable, 3 cuft - 300lbs., with 1-1/4 inch Piping.
The 3 cuft classic blast machine LP package holds 3 cubic foot (approximately 300 lbs.) of abrasive blast media. This portable blast machine has 1-1/4” piping and comes with a Flat Sand Valve (FSV) and remote control system. Using a No. 6 (3/8-inch) blast nozzle will provide approximately 15 minutes of productive blasting at 100 psi.
Flat Sand Valve
The included manually-operated FSV can be used with expandable mineral and slag abrasives, as well as plastic media. However, the FSV does not work well with metallic media.
Remote Controls
The included TLR-100 remote controls are not equipped with an Automatic Cutoff Switch (ACS).
Package Details
This high-performance and versatile low pressure blast machine package can remove contamination, corrosion, mill scale, and coatings from most surfaces with the added benefit of portability. The included "LP" Low Pressure Breathing System package provides everything necessary to begin blasting with an ambient air pump (to be used with the included LP Apollo respirator).
This cost-effective package includes:
- TLR-300 remote controls
- 1" screen, abrasive trap
- 1 pair of leather gloves
- 16" diameter machine screen
- NHP-2 (nylon) holder, 1" ID
- APL 60/600 lens cover .0075" (25 pk)
- LP respirator hose, 3/8" x 50 ft extn
- Safety cable 1-1/2" to 3" OD
- Blast machine cover, 45" x 54" poly
- CQPS-2 (nyl) coupling, supa
- CQGP-3 coupling gasket (10 pk)
- Air filter (MS), 1-1/2" MD (SMC)
- Supa blast hose 1-1/4" ID x 50ft coupled
- TMP-6 nozzle, 3/8" Contractor
- FSV abrasive metering valve
- APL600/60 intermediate lens (5-pk)
- APL 600HP DLX helmet w/CFC
- Washers, NW-32 (10 pk)
FAQ: The difference between High Pressure Breathing Systems and Low Pressure Breathing Systems packages?
