Clemco Part #28437
Standard Wetblast FLEX systems have an operational pressure range from 50 to 120 psi. This FLEX package with 1-1/4” fine thread is a complete blast system with all components to begin blasting. In additional to everything included with the FLEX Base Unit, this package also includes 50 feet of coupled Supa blast hose, a 7/16” orifice long-venturi nozzle, and operator safety equipment.
What’s included with this FLEX package (1-1/4” thread):
- FLEX Base Unit*
- 50’ x 1-1/4” ID Supa hose with nylon holder and nylon coupling
- SAS-7 silicon carbide nozzle
- Apollo 600 HP DLX supplied-air respirator (with outer lenses and intermediate lenses)
- ClemCool air conditioner
- CPF-20 breathing air filter
- 50’ respirator hose
- Leather gloves
- 6 abrasive trap screens
- Coupling gaskets
- Nozzle washers
- Nylon ties
*The FLEX Base Unit (1-1/4” thread) includes the following:
- Model 2448 6 cuft capacity blast machine (1-1/4” piping)
- Millennium Inlet Valve
- TLR Outlet Valve
- RLX control handle with ACS
- 52’ twinline hose
- 52’ ACS hose
- AQV AutoQuantum Metering Valve
- 1-1/4” fine thread x 1” entry Pipe Injector Assembly with 52’ water hose
- 120-gallon capacity water storage tank
- 24” diameter screen
- 24” diameter cover
- 1-1/2” pressure regulator
- 1-1/2” Air Filter
- Safety cable
- 1-1/4” fine thread x 1” entry Nozzle Injector Assembly
Note: If you already own coupled blast hoses (minimum 1” ID), nozzles, and operator safety equipment, you can purchase the FLEX base unit blast system separately.
