BLACK BEAUTY ABRASIVES Coal Slag QPL Approved for SSPC-AB1 and MIL-A-2262B (in Select Plants) and Passes 40CFR 261.24a (TCLP) & California Title 17 (CARB) from Harsco.
BLACK BEAUTY® Abrasives are the original coal slag grit in the marketplace, leading the industry for nearly 80 years within a variety of applications requiring efficient and safe surface preparation and industrial cleaning. Coal slag abrasives are considered to be the best value per square foot of cleaning and are used to remove thick surface coatings, rust, paint, and mill scale from various substances such as stainless steel. aluminum, concrete, brick, and wood.
Key Features & Benefits:
BLACK BEAUTY® Abrasives Coal Slag is chemically inert (or non-reactive) and contain less than 1% free silica produced from 100% recycled glass, preserving substrate integrity and reducing health hazards from silica dust for an eco-conscious and overall safer alternative during your blasting operations.
Angular-shaped and sharp-edged particles make this Coal Slag very effective at cutting and removing tough surface contaminants, providing better surface profiling for coating adhesion. Coal Slag has a hardness of 6 to 7 on the Mohs scale, demonstrating incredible efficiency at cleaning and prepping contaminated surfaces quickly and adequately.
Product Grades:
Medium: (12/30)
- Suitable for industrial applications, general purpose repair and maintenance blasting for the removal of paint, rust, structural steel, mill scale, and aggregate exposure (3.0-5.0 Mils).
- Suggested Minimum Nozzle Size of 1/8".
Fine: (20/40)
- For new construction, light paint, rust removal, and for special maintenance applications requiring reduced profiles. Automotive, hobby, and soda blast alternatives (2.0-3.5 Mils).
- Suggested Minimum Nozzle Size of 3/16".
Extra-Fine: (30/70)
- To clean surfaces and create a very smooth finish, brush-off blast, or in a high pressure water blast system. Ideal for a very low or specific profile (1.5-3.0 Mils).
- Suggested Minimum Nozzle Size of 1/4".
For any additional product information as well as storage and handling requirements, refer to the Product Data/Information Sheet or Safety Data Sheet provided in Manuals on this page.
